Unit Value Cost Analysis Injection Molding

Part A. Below you will find a direct cost/lb. analysis between the two products. As you can see there is a significant percentage of savings with Kostrate®.
	Kostrate ® Edge	PC
Specific Gravity
Unit Weight (g)
Units / lb.(454g)
Material Cost / lb.(454g)	$	$
Unit Cost	$	$
$ Savings / Unit	$			LBS (yr.)	Savings
$ Savings / lb. (454g)	$		x		$

Part B. In addition to looking at the above savings in a cost/lb. relationship, you may also look at just the specific gravity relationship to see where part of that savings came from. This can be by keeping the material cost the same for both products.
	Kostrate ® Edge	PC
Specific Gravity
Unit Weight (g)
Units / lb.(454g)
Material Cost / lb.(454g)	$	$
Unit Cost	$	$
$ Savings / Unit	$			LBS (yr.)	Savings
$ Savings / lb. (454g)	$		x		$

Part C. In regards to machine cost, you can see how cycle time and direct savings in dollars.
	Kostrate ® Edge	PC
Cycle Time / Unit (Secs)
Units per Minute
Units per Hour
Machine Rate / Hour	$	$
Machine Cost / Unit	$	$		Units	Savings
Machine Savings / Unit	$		x		$

	SUBTOTAL SAVINGS				$

Part C. In regards to machine cost, you can see how cycle time and machine rate direct savings in dollars.
	Lower Processing Temp / Energy			$	$
	No Drying			$	$
	Splay / Rejects			$	$
	Processing / Stability / Burnt			$	$

	SAVINGS				$